Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

Because the success of a catback exhaust system depends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

The new Large Bore-HD exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. This system is available in 4" cat-back with muffler. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. For over 40 years, MagnaFlow has maintained its position at the forefront of high-end catalytic converter and performance exhaust manufacturing. MagnaFlow stands by its products with industry-leading warranties in service of its mission to provide the highest quality exhaust experience from start to finish.

A cat-back exhaust system is one of the best ways to improve your car's performance. It replaces the stock cat-back exhaust system and gives your car a more aggressive sound. Perhaps the most significant benefit is the increased power that it can provide.

Shelby American is pushing the latest generation Shelby GT500SE supercar to new levels. As the first Carroll Shelby Signature Edition version for this model, the car delivers sizzling styling, razor sharp handling and an additional 40 horsepower. The 2024 Shelby Super Snake is the pinnacle of our performance cars based on Ford's next generation S650 Mustang sports car. Gases are pulled from the cylinder head by the exhaust manifold, at which point they are removed via the exhaust at the rear of the vehicle.

They directly bolt on to where the original exhaust sits and do not require any further modification. Cat back exhaust systems come with exhaust pipes, muffler and exhaust tips, so you have everything you need to replace the exhaust. The cat back is the section of the exhaust that runs from the outlet of the catalytic converter to the exhaust tips. Exhaust systems that include this often feature a large pipe running from the converter to the muffler, with mandrel-bent turns and glasspacks for reduced back pressure. Your go-to spot for information on the exhaust system, as well as mufflers, catalytic converters, pipes and sensors.

If you've got questions about cat-back exhaust systems, pipe diameters, muffler type, or anything else, talk with our product specialists. All 1995 model year vehicles, and all 1992 model year or earlier vehicles. All model year vehicles that were manufactured with EPA or Federal emissions certification. Exhaust gases from the cylinders are collected in the exhaust system to prevent harmful fumes from entering the vehicle.

This modification includes the pipes, muffler, and sometimes the resonator. The term "cat-back" itself signifies that everything behind the vehicle’s catalytic converter is being upgraded or replaced. Milltek's Sport Catback Exhaust Systems are designed to compensate for the sound reducing qualities from the particulate filter and significantly improve the sound aesthetic of the exhaust system.

Decades later, Gale and the team are not only innovating, patenting products, and setting the bar for aftermarket performance manufacturers, we're also sharing our secrets with the world. The 6.2-liter LS3 V8 was factory rated at 415 horsepower and 415 lb-ft of torque. It is used to expel harmful gases and substances from your engine; without it, the car could experience a build-up of fumes.

Not only do our products boost performance and optimize exhaust flow, but we also add a touch of personalization to your ride. Find the perfect performance exhaust system compatible with Ford, 2016 ram 3500 egr delete kit, Chevy/GMC, Jeep, and more. Our patented design outflows all other exhausts on the market. The CORSA Performance GT350 Active valve exhaust system allows the driver to flexibility of having one exhaust that produces both an Xtreme and a Sport sound level.

Shelby also gives the truck some off-road chops by installing a BDS 3.0-inch lift kit, Fox 2.5-inch internal bypass dampers, and performance rear traction bars. The truck also sits on a set of 22-inch Shelby wheels wrapped in 35-inch all-terrain tires. The new 2024 Ford Shelby F-150 packs up to 785 hp, or more power than many supercars. That's with an available supercharger for the truck's 5.0-liter V-8. Buyers can also opt for a naturally aspirated version where the V-8 keeps its stock 400-hp rating.

The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with refined style. Whether it's for work or play, the Roush Super Duty promises to deliver an unparalleled driving experience, making every journey memorable. If the above ten reasons to consider a cat back exhaust system have you thinking it may be right for your car then Sandgate Auto Electrics are the people to call. Your neighbours may disagree that this is a benefit, but as we’ve mentioned earlier, and depending on your muffler choice, your vehicle will have a lot more grunt. This may well be the area you need to do the most research into and the sound quality, and type, can range drastically per system. At Walker, it's more than peace of mind in knowing we lead the industry with unparalleled level of compliance.

One main reason for choosing to remain with a stock system is because it comes already installed on your vehicle. You should know the difference between a dual exhaust and a dual exit exhaust system. But it is easy to mistake a dual exit exhaust for a dual exhaust system. The materials are often 304 stainless steel or aluminized steel. The stainless steel is usually coated in special metals that make it corrosion-resistant. This means there will be a reduction in the amount of load on the engine, leading to higher mpg and fuel efficiency.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

Different exhaust systems offer different noise levels and tones, but how? Sound quality and overall loudness of an exhaust system can vary significantly depending on the pipe diameter, size and design of the muffler, resonator inclusion, and the number of outlets. For this reason, all systems sold on RealTruck are filtered by noise level, including loud, moderate, and quiet. From the factory, most manufacturers employ small-diameter piping, restrictive mufflers, and noise-reducing resonators, significantly smothering exhaust flow and sound quality. A front pipe back system replaces a few key components of the OEM Honda or Acura exhaust found on your EX, Touring, Si, or A-Spec that are after the Front Pipe (the pipe that goes under the engine).

In this article, we’ll explain what a catback exhaust system is, what it does, and why it’s different from your run-of-the-mill exhaust systems. There are seemingly endless available upgrades when looking to enhance vehicle performance. It certainly rings true when it comes to your vehicle’s exhaust system. One term that you’ve probably heard if you’re in the market for an aftermarket exhaust upgrades is cat-back exhaust. What exactly does it mean, and how does it change the way your vehicle performs? This 2009 Pontiac G8 GXP is one of approximately 1,830 examples produced, and it has 16k miles.

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

Your Charger will definitely grab people’s attention each time you accelerate. However, to feel the benefits of this upgrade, you need to install a Dodge Charger cat back exhaust kit that fits your vehicle’s specifications. Thankfully, AmericanMuscle carries a variety of cat back exhaust systems that match your Dodge Charger’s configuration and your driving lifestyle. We’re also dedicated to providing the best products in the market, so all of the items we have are made by trusted automotive brands.

Therefore, they are placed as close to the engine as possible, or one or more smaller catalytic converters (known as "pre-cats") are placed immediately after the exhaust manifold. Founded in 1988, Steeda is the leader in Ford performance products. We specialize in the engineering and manufacturing of parts for the Ford Mustang, Bronco, Bronco Sport, Explorer, Escape, Fusion, Focus, Fiesta, Ford Trucks, and more!

I do live in a residential community and want to keep things civil with my neighbors...so I went with the resonated/muffled setup. Orders of $299.99 or more ship free within the continental U.S.Shipping to Alaska and Hawaii is additional and not included.We do not ship international at this time. Enter your email address above, to be notified of new products released. Sign up to our newsletter and stay up to date on all the latest news, products and events.

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

Rattling or knocking noises from your vehicle are the most common signs that you need a new exhaust. Any rust on the exhaust can also be a sign that an upgrade is due. When you bid we pre-authorize your credit card for the service fee (this helps prevent fraud). If you win the auction, your card will be charged for the service fee and you pay the seller directly for the vehicle. If you don't win, your existing pre-authorization will be released.

Noticeable gains will be noticed in the initial throttle response, with reduced turbo lag. Engine movement and exhaust weight are transferred into the exhaust hangers, which puts a lot of stress on the mount brackets. IE's catback system is manufactured with multi-point and boxed-in hanger mounts designed to stand the test of time. Drive confidently knowing your exhaust is securely mounted and protected against annoying rattles or breaks. All piping is constructed of mandrel-bent T304L stainless steel to offer superior corrosion resistance.

This is the 3rd Gen Toyota Tundra Borla S-Type Cat Back Exhast with Chrome Dual Tips. Borla manufacturers some of the best Toyota Exhaust systems, and this S-Type 2022+ Tundra Exhaust is no different, featuring the Merge X-Pipe for increased performance adn improved sound. The Carven-R series Performance Muffler delivers an aggressive sound with a refined tone. This unique pack-less (Patent# D802,507) muffler design is one of its kind. Stand out from the crowd with a performance exhaust system that sounds great. Save big on that signature MBRP sound during Pick Up Your Sound.

The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. You get the only the best with SPD's 3" resonator 2016 ram 2500 egr delete kit pipes. These 304 Stainless Steel pipes are .. SPD's high performance stage 1 resonator cat-back pipe replaces your factory resonator pipe with a t..

Our exhaust system uses larger piping compared to the factory exhaust system, yet weights 5 lbs. The factory system uses 2.56" piping, which reduces to 2.36" before splitting, greatly diminishing the overall diameter of the system. Finally, our system’s 4" exhaust tips dwarf the factory 3.15" tips, giving the rear of the vehicle a sportier look. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout.

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage. Take your stock or modified Colorado/Canyon to the next level with a Mallett Performance Cars exhaust system today.

Video Features Options Short video of our 3" Catback Exhaust for the 07+ Honda Civic Si Sedan. Note that this was installed on a naturally aspirated setup (stock header and... Already own an Ultimate Racing Performance Muffler and want to upgrade to a full Catback system. For information about our other auto repair services, please refer to our comprehensive guide. But both cons of a resonator are not present with a cat-back exhaust system. For the noises that the muffler fails to get rid of, the resonator eliminates them. As a result, they are fitted with both a muffler and a resonator.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

The performance parts available at Steeda include lowering springs, wheel spacers, spark plugs, brake kits, and many more. Choose from our Ford automotive parts today so that you can keep your ride in great condition. When it comes to picking a cat back exhaust system, you will likely be choosing between stainless or aluminized steel. The majority of the performance systems are made from stainless steel which is favoured as they won’t oxidize and corrode over time like traditional steel can.

You get the only the best with SPD's 3" resonator delete pipes. These aluminized steel pipes are 3" .. SPD's high performance resonator cat-back pipe replaces your factory resonator pipe with a true 3" p.. The welds and craftsmanship are top notch, and the tips look perfect.

Aftermarket custom cat back exhaust systems increase the efficiency of an exhaust system because of the mandrel-bent turns and reduction in back pressure. They are the popular choice when it comes to aftermarket exhaust systems as they offer reliable performance and sound without having to buy a new catalytic converter. They are also well-suited to those who like to handle their own installation!

So listen up and checkout this MBRP Black Series 3" Dual Cat-Back Exhaust on a 2021 LT1 Camaro. This is the main path to completing your full exhaust upgrade. And when it's time to perform maintenance that required the removal of your exhaust system make sure that you use new gaskets if your existing gaskets have too much heat damage. And check out the rest of the exhaust options to fully protect and support your exhaust beyond your cat-back setup.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

We develop solutions to common issues that still trip up our competitors. For instance, we recently upgraded our Ford Maverick exhaust system offerings to include AWD and FWD configurations. President and founder, Gale Banks, began at age 14 with an engine teardown of his mother's '31 Ford Model A that resulted in an increase of 65 hp for a total of 105 hp.

They both improve your engine’s tone and give it that deep rumble loved by every motor enthusiast. Getting a cat-back exhaust system is definitely the more budget-friendly option. Other benefits of aluminized steel is they are lightweight and very workable.

Don’t deny yourself the perfect blend of sound and performance any longer. Give our team a call today for a cat-back exhaust system that will unleash the potential of your Maverick. I'm very pleased with this [Thermal R&D] exhaust on my Maverick. Loud enough to let the people around you know you have an exhaust but not so loud as to wake up your neighbors at 4 am. During cruising you can barely hear it inside but it wakes up when you step on it. Definitely not obnoxious but gives the truck a performance sound.

#19680 includes all the hardware necessary for do-it-yourself installation. Extensive testing on our in-house dyno has been used to ensure this SPEQ Series truck exhaust system not only sounds impressive but also has the performance bite to match its newfound bark. Consent to receive text messages for these purposes is not a condition of any purchase, service, or sweepstakes entry. So, if you are okay with the sound and performance then you have no need to replace your original exhaust system. OEM exhaust systems on the other and have crush-bent tubing made of normal steel.

CORSA exhaust parts, hardware and detailed instructions are included in each kit so you can get on the road as fast as possible. We hope this article has provided a thorough answer to the question of what is a catback exhaust and provided advice on how they can help improve the performance of your car. While they may not provide a big performance boost for all cars, cat-back exhausts are a simple and effective way to improve gas flow in your exhaust system beyond what stock exhausts are capable of. Catalyst poisoning occurs when the catalytic converter is exposed to exhaust containing substances that coat the working surfaces, so that they cannot contact and react with the exhaust. The most notable contaminant is lead, so vehicles equipped with catalytic converters can run only on unleaded fuel.

Cat-back exhaust systems will include any pipes that run from the catalytic converter to the muffler, the muffler itself, any pipes that may run from the muffler to the exhaust tips, and the exhaust tips themselves. Some cat-back exhaust systems have a muffler grand cherokee ecodiesel delete kit, which means no muffler is included. This is typically found on vehicles that function primarily for off-road use; it's not standard on daily driver vehicles and is even illegal in some states.

Beyond these incremental advantages, there’s not much to tell cat-back and regular exhausts apart, as they are commonly made from the same types of materials in roughly the same shape. Most newer vehicles have electronic fuel injection systems, and do not require air injection systems in their exhausts. Instead, they provide a precisely controlled air-fuel mixture that quickly and continually cycles between lean and rich combustion. Depending on your make and model, cat back exhaust systems can lead to an increase in fuel economy. The engine doesn’t have to work as hard pushing exhaust gases through the piping which reduces its load and leads to higher efficiency and MPG. For car enthusiasts and performance drivers, upgrading the exhaust system of a vehicle is a no-brainer.

A catback exhaust system works by replacing the muffler and tailpipe with a more free-flowing design. Take full advantage of everything we have to offer with an upgraded CORSA exhaust. CORSA full exhaust systems help optimize performance and increase sound and will make heads turn in your direction every time you pass by. With our patented RSC® technology and unmatched customer experience, you'll see why we've been leaders of our industry for over 25 years. View our entire selection today, and find the CORSA exhaust that will leave your rides unrecognizable. If you have any questions about our high-performance exhausts, don't hesitate to reach out.

Next we have the option we refer to as the Cat-back system (sometimes also known as "with Front Pipe" exhaust). One of the most noticeable changes after installing a cat-back exhaust system is the sound. The exhaust note becomes deeper and more pronounced, giving your vehicle a more aggressive tone. The specific sound varies depending on the muffler and pipe design, allowing drivers to choose a system that matches their preference for loudness and pitch.

Since 2003, we have specialized in building BMW M-models (and Tesla) with a refined selection of industry-leading, high quality products. Our 8,000 sq/ft installation facility and shipping headquarters is located in Anaheim, California. IE's advanced DroneTrap technology captures the pulse waves responsible for your B9 3.0T engine's exhaust note and draws them into dual mathematically tuned resonators. The internal ports are engineered to resonate these waves against each other in a process that selectively cancels out those responsible for annoying drones.

In addition, a cat-back exhaust can also improve your car's fuel economy. So, if you're looking for a way to get more out of your car, a cat-back exhaust is a great option. We now offer Maverick cat-back exhausts in both all-wheel drive (AWD) and front-wheel drive (FWD) configurations.

Advanced 3D scanning tools and cutting-edge software provide our engineers with a high-resolution digital model of the Audi B9 S4 chassis. This data is then used to maximize the exhaust size for flow and optimize all available space for the perfect catback fitment. CORSA branded exhaust systems are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. The new exhaust sounds perfect, a marked improvement over stock. It is not too loud - I use the car as a daily driver and drive in capital beltway traffic.

Fine-tune your ride for the best performance and aesthetic today. Steeda offers the largest complete line of Ford-based parts and accessories for your build and is considered the largest privately owned Ford performance-based operation in the world. If you've been searching for the perfect place to purchase Ford automotive performance parts for your vehicle, then you're at the right place!

At Euro Car Parts, we have exhaust parts to help you do just that. It is important to note that the fuel saving will be more noticeable when traveling at freeway speeds than city driving, but if you spend a lot of your day on the road, you’ll likely notice the difference. View our technical tips to help you install, learn about and maintain your exhaust system the right way.

Dual Magnaflow wide open mufflers with quad 3.5" exhaust tips, slightly louder and deeper than standard Borla. This upgrade option retains the large Borla resonator and replaces Borla mufflers with dual Magnaflow mufflers and quad tips. Borla is a great exhaust, but with this upgrade your back will look much better with the large aggressive oval quad tips and will sound better too! Cat-back exhaust systems refer to all of the components that exhaust gasses flow through after exiting the vehicle’s catalytic converter.

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts; it's about having a trusted partner every step of the way.

It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the exhaust system, and continues to the tailpipe. With an aftermarket performance exhaust system from CORSA, you'll be able to lose yourself in rich, deep exhaust notes you can feel in your chest with every drive. It doesn't matter if you're behind the wheel of a BMW, Charger, F-150 or Wrangler, you can choose from our sport, touring or extreme sound level performance exhaust systems for the sound that suits your tastes best. By allowing your engine to run more efficiently, a cat back exhaust can help you to save money at the pump. As an added bonus, cat back exhaust systems often produce a deep and throaty sound that many car enthusiasts find appealing. Cat-back systems usually have the option or glasspack or straight-through mufflers, which are designed to work with the other system components to reduce back pressure.

Let’s look at the top ten reasons why a cat back exhaust system may be right for you. While a cat-back exhaust system includes all components from the catalytic converter to the exhaust tips, an axle-back system only replaces parts from the rear axle to the tips. Axle-back systems are generally easier to install and less expensive but offer more limited performance improvements and sound changes compared to cat-back systems. All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements.

There are subtle changes on the outside to let onlookers know that this is no ordinary F-150, such as a custom dual-intake hood, a custom front fascia and grille combo, and Shelby badging. For the interior, Shelby adds carbon-fiber trim, billet racing pedals, custom floor mats, and a serialized plaque. For lean-burn spark-ignition engines, an oxidation catalyst is used in the same manner as in a diesel engine. Emissions from lean burn spark ignition engines are very similar to emissions from a diesel compression ignition engine. Upon failure, a catalytic converter can be recycled into scrap.

A cat back exhaust system, also known as a catback exhaust, is an aftermarket automotive exhaust system that replaces everything in the exhaust system from the catalytic converter to the tailpipe. Cat back exhausts are available in various configurations and materials, allowing drivers to choose the one that best suits their needs and preferences. An aftermarket cat back exhaust might be the perfect upgrade that can enhance your Dodge Charger’s performance and road presence. Unlike its OEM counterpart, it boasts a less-restrictive construction, so it can release more exhaust gases. A cat back exhausts is also designed to install behind a catalytic converter, so remains emission compliant. In addition, its design lets your vehicle generate a more distinct exhaust sound.

From the inception of the small block Cobra, Carroll Shelby intended to build a race version of his lightweight roadster; its ultimate iteration was the 289 FIA roadster. Special Edition Shelby F-150 Super Snake celebrates Carroll Shelby's passion for performance trucks. Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a performance street truck to honor the ledged.

You can also add other upgrades to give your Charger an extra performance boost. Visit the AmericanMuscle headers and exhaust accessories pages to find parts that fit your new cat back system. Mishimoto offers a wide selection of exhaust systems, including cat-back exhausts, performance exhaust systems, and aftermarket exhaust options, designed to enhance your vehicle's performance, sound, and style. Our exhaust systems are engineered with precision and constructed using high-quality materials to deliver improved exhaust flow, increased horsepower, and an enhanced driving experience. Enhance the sound and performance of your Subaru with our premium cat back exhaust systems. Designed to replace the factory exhaust system from the catalytic converter rearward, these cat back exhausts offer a deeper, more aggressive exhaust note while reducing restriction for improved airflow.

The DroneTrap system is wrapped up in our stamped multi-wall resonator that reinforces the housing inside and out. This high level of manufacturing protects the resonator from warping or splitting at the welds under exhaust movement. Prices stated here are only for sales within the continental United States and ordered via the ROUSHperformance.com web site. Prices for other territories and countries may vary due to shipping fees, duties, and other factors.

Explore renowned manufacturers such as Borla, Invidia, and HKS, known for their exceptional craftsmanship and exhaust system expertise. FTSpeed's cat back exhausts are designed to perfectly fit your sports car, delivering noticeable gains in both power and aesthetics. Elevate your vehicle's performance and sound with our premium cat back exhaust systems. Cat-back exhaust systems typically feature a muffler, and sometimes not, and these will have piping that will route to your catalytic converter. The piping will have larger bends that are as straight as possible to provide an unobstructed exit path for the exhaust gases.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

Cat-back exhaust system kits come standard with tailpipes, a performance muffler and exhaust tips. The inclusion of our wider, mandrel-bent tailpipes means cat-back exhausts are your go-to for increasing your performance gains along with boosting your sound. While horsepower and torque gains vary from vehicle to vehicle, you can expect anywhere from a percent gain in horsepower and torque after installing a cat-back exhaust system.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz's reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

The time and money you spend are a big investment, and we want to help you make the best decision for your driving dreams. Typically, a cat-back exhaust system will increase your car’s horsepower by somewhere between 5 and 50 brake horsepower. This will vary greatly depending on the condition of your exhaust and engine, so you should ask your mechanic if getting a cat-back exhaust is the best way to improve the performance of your car.

From Overland Series to our all-new SPEQ Series, explore MagnaFlow's latest performance exhaust systems designed for the 2024 Toyota Tacoma. Aftermarket cat-back exhaust upgrades are a relatively simple way to increase your vehicle’s power. Typically these upgrades involve installing wider piping with fewer sharp or sudden bends as a way to reduce backpressure. Backpressure is pressure opposing the desired flow of exhaust gasses. The more you are able to reduce backpressure, the more efficient the system will be, and ultimately your horsepower will increase. Cat-back exhaust refers to any part of the exhaust system that’s behind the catalytic converter.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

You also need to be careful when tightening the bolts on the cat back. Over-tightening can damage the system, so just make sure they're tight enough to hold everything in place. It's important to make sure that the cat back is properly aligned with the exhaust pipe. If it's not, you could end up with an inefficient or even dangerous exhaust system. Competitors often rely on generic silencers or gimmicks that claim to cut out drone without any real knowledge or development involved.

Installation was super easy, and did it myself with only ramps. When IE claims 'no-drone' they really mean it - the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it's the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

The first widespread introduction of catalytic converters was in the United States automobile market. The exhaust system is crucial to a car’s performance, especially the catalytic converter which can go bad if it’s overworked. A stock exhaust system strives to minimize the car’s materials while maximizing space. This means that the exhaust system’s performance can suffer, having to work harder with less horsepower.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style and technology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for your truck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

The only difference is that it features straight perforated pipes. The original exhaust systems focus more on just reducing the sound and not shaping it to give it that desired deep growl. One function shared with both the axle-back and the cat-back exhaust systems are shaping your vehicle’s tone.

Even a small leak can cause problems down the line, so it's better to be safe than sorry. By following these simple tips, you can ensure that your cat back installation goes smoothly and without any issues. When it comes to cat back installation tips, there are a few things you need to keep in mind.

Make sure your Subaru, Nissan, Honda, or Toyota is outfitted with a top notch exhaust system from Racing Exhaust System. Some are ideal for normal vehicles while others are better for high-performance engines. Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967.

The remaining waves produce the deepened and enriched exhaust acoustics you love. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. The muffler is a glass filled, large chamber design that provides the optimal amount of exhaust velocity for the engine while producing a great low rumble sound - without any annoying buzzing, "racer" sound. The high clearance fitment dramatically reduces the risk of getting hung-up on obstacles when off-roading. We’ve been helping customers with performance upgrades since 2006, and have a staff full of people who can help answer your questions. Our customer service — from our low prices to our fast shipping — has earned us a reputation with a legion of fans.

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it will reduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

The amount of horsepower gained from installing a cat-back exhaust system varies by vehicle and the system’s design. However, when combined with other performance enhancements, the gains can be more significant. The primary goal of a cat-back exhaust is to reduce back pressure, allowing your engine to breathe better and operate more efficiently. The factory exhausts come in mandrel bent tubes made of stainless steel or aluminized steel. Besides offering longer durability, the construction also ensures there’s free flow of gases. To improve this, you can opt to replace some parts of the exhaust system using aftermarket performance exhaust systems.

Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a truck built to perform both on and off the road. The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with... From their humble beginnings to becoming one of the most well-known companies in Brisbane and Australia we are experts in the fast developing future of new age vehicles and accessories.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block Corvette and Ferrari increased the power of the V12 powered GTO's, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford's incredible 6.7-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

All are capable of delivering a race-inspired exhaust note along with more power and torque. And this is why cat-back exhaust systems are considered to be one of the best performance modifications that are rewarding in power and sound and are highly effective for all driving purposes. Aside from maximizing your sound gains, the RSC® technology in every CORSA high-performance exhaust allows for a completely free-flowing air path to optimize your performance with every drive.

This picture is looking at the manifold end has a 60mm inlet ID and a 3 bolt flange where the outlet end has a 2 bolt flange and a 50mm outlet ID. Increasing your engine’s torque output gives you the power you need to haul heavy payloads and tow trailers, boats, campers, and more. The Carven-TR Series Performance Muffler delivers a deeper sound with a lower tone. Bradley’s Auto Service is proud to be affiliated with TechNet, a network of more than 12,000 locally owned repair shops that are focused on delivering quality care to the communities they serve. When you have any kind of automotive work done by us or another TechNet-affiliated shop, you are covered nationwide.

In this article, we are going to focus on cat back exhaust systems, and the main ten reasons that we have discovered as to why they are worth a look. If we know our car lovers, finding the right exhaust system for a car or truck is about getting more power without spending a fortune, and cat back exhaust systems tick a lot of boxes. Here is a pic of a converter and looking through the high flow core. Unleash the potential of your big displacement K motor with our high flowing 3" Header Downpipe.  This product eliminates BOTH OEM catalytic converters.  Available Catless or with a single High... We are proud to offer a wide range of completely custom, ready-built exhaust systems and parts at competitive prices with a lifetime guarantee. Contact Bradley’s Auto Service in Red Bank, NJ, today to get a quote for fitting, testing, and tuning your new exhaust system for maximum performance gains.

Exhaust systems also play a role in reducing noise levels, improving engine performance and reducing fuel consumption. To get the power level up to 785 hp, Shelby installs a Ford Performance supercharger, as well as a new carbon-fiber air intake tube, high-performance fuel injectors, and an aluminum heat exchanger. A Borla (cat-back) exhaust system rounds out the list of powertrain modifications.

In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. The design of these systems often sees an increase in horsepower compared to the factory design of a vehicle. Because stock models try to minimise materials and maximise space, with horsepower as a lower priority.

We want to make sure the part fits your specific vehicle so we need a little more information from you. You can find out by inspecting the emissions sticker that is located in your engine compartment.

An upstream air injection point, ahead of the catalytic converter, is also sometimes present to provide additional oxygen only during the engine warm up period. This causes unburned fuel to ignite in the exhaust tract, thereby preventing it reaching the catalytic converter at all. This technique reduces the engine runtime needed for the catalytic converter to reach its "light-off" or operating temperature. Many vehicles have a close-coupled catalytic converter located near the engine's exhaust manifold. The converter heats up quickly, due to its exposure to the very hot exhaust gases, enabling it to reduce undesirable emissions during the engine warm-up period.